DSA Exports

Minimum order quantity: 50 Units

This is a mechanical device made out of anodized aluminum tube.The inner wall of the tube has alternate black and white rings ofdifferent thickness. The reflection of these rings on the patient'scornea helps in analyzing the astigmatism induced due to tight andloose sutures.Eye shield is used for a short duration to protect the patients eye from accidentalinjury or rubbing after a cataract surgery.polycarbonate or polypropyleneusing an adhesive tape or a patch(Sterile)Post Surgery Protection23

Minimum order quantity: 50 Piece

Capsular Tension Ring allow expansion and stabilization of the capsular bag to facilitate a safe IOL implantation and maintain good IOL centration. Capsular tension ring is a highly flexible clear PMMA ring of haptic thickness 0.20 mm.

Minimum order quantity: 20 Piece

Capsule hooks are used for temporary support of the capsular bag during cataract surgery when the zonules are weak or in case of subluxated lenses.

• Capsule hooks are made of Nylon with an adjustable silicon lock
• Designed such that the hook is angled to be in the plane of the anterior capsule
• Easy to get a firm and reliable grip on the rim
• Tip of the hook is rounded to prevent any accidental damage to the peripheral capsule while placing the hooks in the bag
• The round tip also provides a larger support area per hook thereby reducing the number of hooks required in each surgery
• Silicon lock helps in retaining the hook in the retracted position during the surgery

Canabrava Gupta Segment (Capsule Support Segment) is a partial ring of clear PMMA covering approximately one quadrant with a specially designed scleral fixation arm for permanent fixation.

This is a partial ring of clear PMMA covering approximately one quadrant with a scleral fixation eyelet for temporary or permanent fixation.

Minimum order quantity: 100 Piece

Disposable Injector System is specially designed for smoother and safer delivery of foldableIOL. The surgeon can insert foldable lens from 1.8 mm to 3.2 mm incision with various cartridges. This special delivery injection system is made by a combination of advanced polymers of medical grade and high-tech molding technique, diject offers better management of complications during iol implantation, as well as post operative complications (such as corneal deformation due to a widened incision).

Advantages:

• This system is fully compatible, with new generation of extremely thin IOL, designed for micro incision techniques
• This injection system uses hydraulic effect of the viscoelastic solution to push the IOL with a silicone stopper. The hydraulic pressure allows a soft, precise and completely controlled forward movement of the iol through the cartridge. This effect allows the surgeon to inject the iol with delicacy through a micro incision of 1.8 mm, depending upon the insertion technique used
• Equipped with side windows, it allows the surgeon to visualize the free movement of the IOL in the cartridge chamber before inserting it in the patient eye
• Scratches on the IOL, stretching of haptic, uncontrolled unfolding of the lens while releasing from the cartridge, are not found through this advanced technological delivery systems

Minimum order quantity: 10 Piece

Iris retractors are used for temporary retraction (pupil enlargement) of the iris where dilation cannot be achieved pharmacologically.

• Flexible retractors made of bright blue PP (Polypropylene)
• Stretches and stabilizes the Iris during the cataract surgery
• An adjustable silicon stopper provides a superior grip and allows adjustment of the pupil size
• Easy to insert and remove

Minimum order quantity: 10 Box

Eye shield is used for a short duration to protect the patient’s eye from accidental injury or rubbing after a cataract surgery.

• Made from high quality clear polycarbonate
• The eye shield covers the patient’s eye using an adhesive tape or a patch
• Smooth edge for maximum comfort

Minimum order quantity: 50 Units

Dholakia Iris Hook is a set of 5 disposable iris retractors made of black nylon fibre with an adjustable silicone lock. The hook has a ‘U’ shaped bend on one end, which helps in engaging the iris and pulling it backwards to enlarge the pupil. The hook is designed in such a way that it is angled to be in the plane of the anterior capsule. The silicone lock helps in retaining the hook in retracted position during the surgery. After the surgery, the lock can be adjusted to release the iris so that it comes back to its original position.

Minimum order quantity: 10 Box

• Eye shield is used for a short duration to protect the patient’s eye from accidental injury or rubbing after a cataract surgery.

  • Made from high quality clear polycarbonate
  • The eye shield covers the patient’s eye using an adhesive tape or a patch
  • Smooth edge for maximum comfort

Minimum order quantity: 100 Piece

Disposable Injector System is specially designed for smoother and safer delivery of foldableIOL. The surgeon can insert foldable lens from 1.8 mm to 3.2 mm incision with various cartridges. This special delivery injection system is made by a combination of advanced polymers of medical grade and high-tech molding technique, diject offers better management of complications during iol implantation, as well as post operative complications (such as corneal deformation due to a widened incision).

Advantages:

• This system is fully compatible, with new generation of extremely thin IOL, designed for micro incision techniques
• This injection system uses hydraulic effect of the viscoelastic solution to push the IOL with a silicone stopper. The hydraulic pressure allows a soft, precise and completely controlled forward movement of the iol through the cartridge. This effect allows the surgeon to inject the iol with delicacy through a micro incision of 1.8 mm, depending upon the insertion technique used
• Equipped with side windows, it allows the surgeon to visualize the free movement of the IOL in the cartridge chamber before inserting it in the patient eye
• Scratches on the IOL, stretching of haptic, uncontrolled unfolding of the lens while releasing from the cartridge, are not found through this advanced technological delivery systems

Minimum order quantity: 10 Piece

Ophthalmic Retractors:

1. Lachrymal sac retractor spring action with screw lock 3x3 semi sharp prongs.
2. Lachrymal sac retractor curved with 3x3 semi sharp prongs screw controlled.
3. Lid retractor hinged type
4. Tissue retractor thin curved blade, size 7mm, 9mm, 11mm wide.
5. Lacrimal retractor 4 prongs, available in blunt & sharp prongs.
6. Orbital retractor 14mm wide, 56mm long blade with 4.5mm wide notch in the blade.
7. Lid retractor, blade size 7.5mm, 11mm, 13mm, 15mm, and 17mm wide.
8. Iris retractor 3.5mm wide and gently curved shaft.
9. Titanium lachrymal sac retractor curved with 3x3 semi sharp prongs screw controlled.
10. Titanium lacrimal retractor 4 prongs, available in blunt & sharp prongs.

Flexible iris retractors are used for temporary retraction (pupil enlargement) of the iris where dilation cannot be achieved
pharmacologically.

• Flexible hook made of bright blue PP (Polypropylene)
• Stretches and stablizes the Iris during the cataract surgery
• An adjustable silicon stopper provides a superior grip and allows adjustment of the pupil size
• Easy to insert and remove
• CE marked

Minimum order quantity: 25 Piece

Cartridge is made of biocompatible polypropylene homopolymer; they are molded with a specified low temperature injection molding technique. This technique makes it possible to increase amorphous of the polypropylene surface.

Buonsanti Dual Hook is a system with a combination of both, an iris retractor and a capsule hook. It is used for simultaneously providing a temporary support to the capsular bag and for temporary retraction of the iris, without making too many incisions.

Cataract Goggle with Side Cups

Packing: Pack of 12 pcs

Minimum order quantity: 50 Unit

Anterior chamber maintainer is used for maintaining the anterior chamber during an ophthalmic surgical procedure.

The Anterior Chamber Maintainer is connected to a separate saline bottle and the tip is inserted into the anterior chamber through the side port incision. In case there is any surge or the chamber becomes shallow, the saline from the bottle automatically fills the anterior chamber avoiding posterior capsule rupture or other surge related complications.

• Ultra thin wall needle for maximum flow
• CE Certified